The Lytzen hot air oven is used for heat treatment and drying of various types of monofilaments and operates according to the convection principle, where air is circulated through one or several circulation systems.
The air flow occurs parallel with the material, which secures a stable material flow and has air inlet from below and above. The top part opens in 2 steps by means of electrical actuators; step 1 for insertion of material and step 2 for cleaning and service purposes.
The Lytzen hot air oven can be adjusted in working width, length, and height, according to customer requirements. Please check our data sheets.
In a Lytzen pyrolysis oven plastic residues in nozzles or similar tools are removed by means of a pyrolysis process.
The Lytzen pyrolysis oven consists of a burn-off chamber and an afterburner unit. The top part of the burn-off chamber opens pneumatically, and inside the chamber a grating is fitted for the placing of nozzles/tools. The chamber is electrically heated for a temperature up to 700° C.
The burn-off chamber can be adjusted in the working length according to your requirements.
The afterburner is gas heated by means of a gas burner, which is placed in the bottom of the afterburner. The afterburner can be placed on either the left or the right side of the burn-off chamber, which also applies for the control board.
In the pyrolysis process the gas, which is released in the burn-off chamber, is led into the afterburner and burned off.
The melted plastic residues flows into a cistern mounted underneath the chamber, and congeals into a hard mass, which is easily removed.
The Lytzen pyrolysis oven is designed to produce an environmentally combustion of plastic material and to meet all present regulations from the authorities regarding clean outlet air.
Lytzen is represented by partners worldwide. Our partners make sure that you have easy access to communication and service for your Lytzen products.
|Phone: (+45) 44 91 12 00